Please use side menu if you cannot use dropdown boxes, nor the header boxes

CWSBYTEMARK
- March 30th 2017 -
Call Today Toll Free: 1 (800) 377-3244
We Are Available Monday to Friday From 8 a.m.- 5 p.m., Pacific Time
E-mail your questions and requirements at sales@cwsbytemark.com

Data on Iron Powder: Power, Line Filter and RF Cores.

Iron Powder: Power and RF Cores Specifications and Datasheets

  • Magnetics and Ferromagnetics Materials
  • Iron Powder Cores : Calculating no. of turns (N), inductance values (L) and AL values.
  • Iron Powder Materals : Description of RF material types with permeabilities of 1 to 75

  • Iron Powder Toroidal Cores: Table of RF Materials showing OD, ID, Ht, Le, Ae, Ve and AL of
  • Materials 0 and 1,
  • Materials 2 and 3,
  • Materials 6, 7 and 10,
  • Materials 12, 15, 17
  • Iron Powder Toroidal Cores: Temperature Coefficient Charts, Material versus Frequency Chart
  • Iron Powder Cores: Physical Dimension and AL Values
  • Copper Wire Tables: Wire Size versus Current capacity, and size versus turns and wire size
  • Iron Powder Cores: Q-Curves
  • Q-Curves - (10 Khz to 100Khz) & (20 Khz to 200 Khz)
  • Q-Curves - (20 Khz to 200Khz) & (40Khz to 400 Khz)
  • Q-Curves - (40 Khz to 400Khz) & (100Khz to 1Mhz)
  • Q-Curves - (100Khz to 1Mhz) & (200Khz to 2Mhz)
  • Q-Curves - (200Khz to 2Mhz)
  • Q-Curves - (500Khz to 5Khz)
  • Q-Curves - (1Mhz to 10Mhz)
  • Q-Curves - (1Mhz to 10Mhz) & (2Mhz to 20Mhz)
  • Q-Curves - (2Mhz to 20Mhz)
  • Q-Curves - (3Mhz to 30Mhz) & (5Mhz to 50Mhz)
  • Q-Curves - (5Mhz to 50Mhz) & (10Mhz to 100Mhz)
  • Q-Curves - (20Mhz to 200Mhz) & (40Mhz to 400Mhz)

    Inductance Charts : Inductance vs Size, Material, and No. of Turns for
  • Materials 0, 1, 2,
  • Materials 3, 6, 10,
  • Materials 15, 17, 26
  • Inductance Charts : Inductance vs Size, Material, and No. of Turns for Large Iron Powder Sizes
  • Iron Powder Sheilded Coil Forms : Adjustable/Slug Tuned : Type L-33
  • Iron Powder Sheilded Coil Forms: Type L-43
  • Iron Powder Sheilded Coil Forms: Type L-57
  • Iron Powder Cores for DC Chokes & AC Line Filters
  • Cores for DC Chokes and 60 Hz AC Line Filters I
  • Cores for DC Chokes and 60 Hz AC Line Filters II
  • Cores for DC Chokes and 60 Hz AC Line Filters III
  • 60 Hz AC Line Filter Application
  • Power Considerations for Iron Powder cores and ferrite cores I
  • Power Considerations for Iron Powder cores and ferrite cores II
  • Iron Powder Material Saturation and Flux Density
  • Iron Powder Core Loss Characteristics I
  • Iron Powder Core Loss Characteristics II
  • AC RMS Voltage and Current Chart. Material 2
  • Iron Powder - Property Chart

Disclaimer: CWS Bytemark reserves the right at any time and from time to time to make changes to design, technical specification, or construction of any product listed on this website without notice. CWS Bytemark also reserves the right to discontinue or limit sale of any product or service available throughout this website on temporary or permanently basis without notice. CWS Bytemark highly recommend customers not to use its products offered on this website for inappropriate use and applications. Products should be tested for its suitability by prospective customers in all possible applications and conditions.


Any Comments, Suggestions or Questions? Contact us! Email: sales@cwsbytemark.com
CWS 353 West Grove Ave. Orange, California 92865
Call us Toll Free: 1-800-679-3184 or 1 (800) 377-3244
Tel: (714) 279-9010, Fax: (714) 279-9482

Copyright (C)2008, CWS Bytemark
Updated 2013 Jan. Rev. V3.1
.